HomeStoreAll

DETERMINATION 2.2 Safety Boots

Product image 1
1 / 13
+8
All

DETERMINATION 2.2 Safety Boots

New Features in version 2.2:

  • Waxed Roughout leather uppers that are visually and physically more resilient than nubuck
  • Abrasion-resistant TPU toe and heel guards significantly extend the life of your boots, by protecting the areas that get the most damage the most often
  • Gusseted tongue to keep stuff out and keep the tongue from sliding to the side
  • Polymer punched eyelets that won't rust, won't scratch, and won't set off metal detectors.
    • They also bring your laces lower, from above the leather with d-rings, to below the leather and in contact with the tongue, creating a snugger fit.
    • Compatible with lace-in zippers to quickly get your boots on and off.
    • Compatible with kilties for a closer fit.
  • Safety Orange liner makes it easier to spot and remove debris and/or hazards.
  • The stitches connecting the quarter to the vamp are closer together and further strengthened with nylon seam reinforcement tape.

 

Carryover Features from version 1.0:

  • "Factory" Boots, NOT "Farm" Boots
  • Outsole optimized for Firm Ground
  • Steel Toe
  • ASTM 2413-18 Impact, Compression, and Electrical Hazard Resistant (view certification)
  • ASTM 2413-18 Puncture Resistant (view certification)
  • ASTM F3445-21 Slip Resistant (view results / view certification)
  • ASTM D471 Oil & Chemical Resistant (view results & discuss with your employer)
  • Total Stack Height 19mm. From Foot to Floor...
    • Leather-wrapped EVA Removable Insert: 2mm
    • Mesh Liner: 2mm
    • Puncture-Resistant Insole: 4mm
    • Micropore EVA Midsole: 3mm
    • Rubber Outsole Base: 3mm
    • Rubber Outsole Lugs: 5mm
  • Ladder Groove
  • No Shank
  • NOT Waterproof
  • Water-Resistant, featuring:
    • Waxed Roughout Leather
    • Goodyear Storm Welt
  • Resoleable
  • Thick & Abrasion-Resistant 2.0-2.2mm Waxed Roughout Leather
  • Mesh Lining for Breathability
  • 6.5 inch Shaft Height
  • Lace-to-Toe Design for Better Fit
  • Cushioned & Suede-Covered Heel Cup for Comfort & Wear Resistance
  • Hybrid Laces (Polyester Sheath over Kevlar Core) for Clean Look & Durability
  • Big & Thick Pull Tab for Easier Donning
  • Size 9 weighs 782 g / 27.6 oz / 1.7 lbs

Learn more here: Determination 2.2: What's New? What's Next?

Are we missing any key features that you need? Tell us about it here.

New Features in version 2.2:

  • Waxed Roughout leather uppers that are visually and physically more resilient than nubuck
  • Abrasion-resistant TPU toe and heel guards significantly extend the life of your boots, by protecting the areas that get the most damage the most often
  • Gusseted tongue to keep stuff out and keep the tongue from sliding to the side
  • Polymer punched eyelets that won't rust, won't scratch, and won't set off metal detectors.
    • They also bring your laces lower, from above the leather with d-rings, to below the leather and in contact with the tongue, creating a snugger fit.
    • Compatible with lace-in zippers to quickly get your boots on and off.
    • Compatible with kilties for a closer fit.
  • Safety Orange liner makes it easier to spot and remove debris and/or hazards.
  • The stitches connecting the quarter to the vamp are closer together and further strengthened with nylon seam reinforcement tape.

 

Carryover Features from version 1.0:

  • "Factory" Boots, NOT "Farm" Boots
  • Outsole optimized for Firm Ground
  • Steel Toe
  • ASTM 2413-18 Impact, Compression, and Electrical Hazard Resistant (view certification)
  • ASTM 2413-18 Puncture Resistant (view certification)
  • ASTM F3445-21 Slip Resistant (view results / view certification)
  • ASTM D471 Oil & Chemical Resistant (view results & discuss with your employer)
  • Total Stack Height 19mm. From Foot to Floor...
    • Leather-wrapped EVA Removable Insert: 2mm
    • Mesh Liner: 2mm
    • Puncture-Resistant Insole: 4mm
    • Micropore EVA Midsole: 3mm
    • Rubber Outsole Base: 3mm
    • Rubber Outsole Lugs: 5mm
  • Ladder Groove
  • No Shank
  • NOT Waterproof
  • Water-Resistant, featuring:
    • Waxed Roughout Leather
    • Goodyear Storm Welt
  • Resoleable
  • Thick & Abrasion-Resistant 2.0-2.2mm Waxed Roughout Leather
  • Mesh Lining for Breathability
  • 6.5 inch Shaft Height
  • Lace-to-Toe Design for Better Fit
  • Cushioned & Suede-Covered Heel Cup for Comfort & Wear Resistance
  • Hybrid Laces (Polyester Sheath over Kevlar Core) for Clean Look & Durability
  • Big & Thick Pull Tab for Easier Donning
  • Size 9 weighs 782 g / 27.6 oz / 1.7 lbs

Learn more here: Determination 2.2: What's New? What's Next?

Are we missing any key features that you need? Tell us about it here.

Select Color
Select Size
From $82.50

Original: $275.00

-70%
DETERMINATION 2.2 Safety Boots

$275.00

$82.50

Description

New Features in version 2.2:

  • Waxed Roughout leather uppers that are visually and physically more resilient than nubuck
  • Abrasion-resistant TPU toe and heel guards significantly extend the life of your boots, by protecting the areas that get the most damage the most often
  • Gusseted tongue to keep stuff out and keep the tongue from sliding to the side
  • Polymer punched eyelets that won't rust, won't scratch, and won't set off metal detectors.
    • They also bring your laces lower, from above the leather with d-rings, to below the leather and in contact with the tongue, creating a snugger fit.
    • Compatible with lace-in zippers to quickly get your boots on and off.
    • Compatible with kilties for a closer fit.
  • Safety Orange liner makes it easier to spot and remove debris and/or hazards.
  • The stitches connecting the quarter to the vamp are closer together and further strengthened with nylon seam reinforcement tape.

 

Carryover Features from version 1.0:

  • "Factory" Boots, NOT "Farm" Boots
  • Outsole optimized for Firm Ground
  • Steel Toe
  • ASTM 2413-18 Impact, Compression, and Electrical Hazard Resistant (view certification)
  • ASTM 2413-18 Puncture Resistant (view certification)
  • ASTM F3445-21 Slip Resistant (view results / view certification)
  • ASTM D471 Oil & Chemical Resistant (view results & discuss with your employer)
  • Total Stack Height 19mm. From Foot to Floor...
    • Leather-wrapped EVA Removable Insert: 2mm
    • Mesh Liner: 2mm
    • Puncture-Resistant Insole: 4mm
    • Micropore EVA Midsole: 3mm
    • Rubber Outsole Base: 3mm
    • Rubber Outsole Lugs: 5mm
  • Ladder Groove
  • No Shank
  • NOT Waterproof
  • Water-Resistant, featuring:
    • Waxed Roughout Leather
    • Goodyear Storm Welt
  • Resoleable
  • Thick & Abrasion-Resistant 2.0-2.2mm Waxed Roughout Leather
  • Mesh Lining for Breathability
  • 6.5 inch Shaft Height
  • Lace-to-Toe Design for Better Fit
  • Cushioned & Suede-Covered Heel Cup for Comfort & Wear Resistance
  • Hybrid Laces (Polyester Sheath over Kevlar Core) for Clean Look & Durability
  • Big & Thick Pull Tab for Easier Donning
  • Size 9 weighs 782 g / 27.6 oz / 1.7 lbs

Learn more here: Determination 2.2: What's New? What's Next?

Are we missing any key features that you need? Tell us about it here.